Power Enrichement Open Loop/ Closed Loop testing
---------------------------------------------------------------------------------
mode:
	-open loop
purpose:
	- verify open loop afr table used during open loop WOT event.
method:
	- Open Loop tune (set closed loop enable temp out of range)
	- Open Loop AFR was set to 7:1 AFR for all temps, 85-100 Kpa
results:  
	- Open table definitely used - O2's went to 1008 mv (pig rich), car bogged, fell on face
conclusion:
	- In Open Loop mode at WOT the Open Loop AFR tables are definitely used in the WOT fueling equation.
----------------------------------------------------------------------------------
mode:
	- Closed loop 
purpose:
	- Verify open loop AFR table usage/ comparison during closed loop WOT event.
method:
	- Closed loop tune (stock as possible)
	- PE left stock
	- Open Loop AFR was set to 7:1 AFR for all temps, 85-100 Kpa
results:
	- Open Loop table definitely not used - O2's approx 880 - 910 mv (not like first experiment)
conclusion:
	- Once Closed Loop enabled the Open Loop AFR table is definitely not used for WOT fuel.
----------------------------------------------------------------------------------
mode:
	- Open loop
purpose:
	- Verify PEvsRPM and PEvsCool used in open loop WOT event.
method:
	- PEvsRPM set to 45, PEvsCool set to 20
	- Open Loop tune (set closed loop enable temp out of range)
	- Open loop AFR left at stock
results:
	- PEvsRPM definitely not used - O2's stayed consitant (950 -980 mv) despite huge PEvsRPM change (+45%)
conclusion:
	- The PE tables are definitely not used during WOT in open loop mode.
----------------------------------------------------------------------------------